Set up Push 2 Pass with F1 25 or F1 26
1. Install
- Download the setup file of the latest version from GitHub, or get Push 2 Pass on OverTake.
- Run it. If Windows SmartScreen warns you, choose More info, then Run anyway.
2. The setup wizard
The first time it starts, Push 2 Pass opens a short setup:
- Pick the language the engineer speaks. Download fetches everything it needs.
- The UDP port: leave it on 20777, the game's default, unless you also run SimHub (see below).
- Pick the voice and the volume.
3. In the game
- Open the game's telemetry settings and turn UDP telemetry on.
- Make sure the UDP port is the one the app shows: 20777 unless you changed it.
- If the game runs on a console or another PC, set the game's UDP IP address to the address of the PC that runs Push 2 Pass.
4. Check that it works
Watch the P2P icon on the taskbar or by the clock. The bar under the letters is blue while the app waits for the game, and turns green once telemetry comes in. Red means something is wrong: usually another program holds the UDP port, or the game sends a format the app is not set for.
The port can be changed any time in Settings, General: Telemetry UDP port. It must match the game's.
Running SimHub as well?
The game has only one UDP output: follow Use Push 2 Pass with SimHub.